The post Mae appeared first on ddc.

The rug’s surface is composed of two layer of parallel bands that are orthogonally overlapped and joined with Punto Zigzag.
The floor can be seen through the gaps between the elements created by this crossing system as well as through the fabric weave.
The elements composing the Net 10 rug are 10 cm wide each.
Only one mélange colour can be chosen.

The post Net 10 appeared first on ddc.

Padding: recyclable expanded polyethylene mixed with Aerelle® blue polyester fiber, fixed covering in three-dimensional polyester fabric.
Upholstery: removable, composed of a layer in synthetic felt – made from polyester fibers derived from the recycling of PET bottles from waste sorting, that will be 100% recyclable again – to which décors are applied, made by using production cuttings of the different fabrics and materials in the collection.

NEW 2023
Removable upholstery cover made by sewing together elements in Paola Lenti Felt with ZigZag stitch, which are then decorated with machine embroideries.

Notes: for better stability, the seating is ballasted with sandbags.

Awards:
The Metamorfosi collection has been awarded the Green GOOD DESIGN AWARD 2023 and the NYCxDesign Award 2023 in the category of Environmental Impact.

The AZ Awards awarded the collection both as one of the best products selected in the Furniture Systems and Collections category and two Honorable Mentions, one for its design and one for its social impact.

The post Bruco appeared first on ddc.

Structure: matt varnished tubular stainless steel AISI 316 and mesh, adjustable plastic feet.

Seat padding: polyester fiber, stress-resistant polyurethane insert, fixed foam covering in water-repellent polyester.
Seat upholstery: removable and available in the fabrics Rope T, Brio, Thea, Rope T mélange, Wara, Whim, Moss, Roseto, Felce or Jabel.

The platform is complemented by two swivel backrests and a side table attached to the structure.

Backrests and side table supports: gloss varnished stainless steel AISI 316 (reference colours: Mano Lucida wood sample collection).

Backrests padding: polyester fiber, stress-resistant polyurethane insert, fixed foam covering in water-repellent polyester.
Backrests upholstery: removable and available in the fabrics Rope T, Brio, Thea, Rope T mélange, Wara, Whim, Moss, Roseto, Felce or Jabel.

Side table: top made of aluminium honeycomb and heartwood edge, both finished with gloss varnish in a colour coordinated with the table support (reference colours: Mano Lucida wood sample collection).

Notes:
The seating area is divided into three sections and shaped to conceal the steel base, revealing only part of the feet.

The side table is detachable and doubles as a tray.

This product can be used also in interior environments.

We advise to use a Winter Set protection cover.

The post Elianto appeared first on ddc.

Seating structure: cataphoresis treated and varnished steel, seat provided with elastic belts.
The structure can feature:
– AISI 304 stainless steel bases matt varnished in avorio or grafite colour and provided with plastic spacers
– plastic spacers.

Seating padding: stress resistant expanded polyurethane, seat area in polyester fibre and polyurethane, fixed foam covering in waterproofed polyester.
Seating upholstery: removable and available in the fabrics Luz, Rope T, Brio, Thea or Wara.

Back cushion: ballasted, in expanded polyurethane and polyester fibre, fixed foam covering in waterproofed polyester.
Back cushion upholstery: removable and available in the fabrics Luz, Rope T, Brio, Thea or Wara.

Notes:
In the Orlando compositions it is possible to use also the Heron side table B45Q.

This product can be used also in interior environments.

We advise to use a Winter Set protection cover.

The post Orlando Pouf appeared first on ddc.

Structure: aluminium sections, visible parts in AISI 316 stainless steel, plastic spacers.

Upholstery: fixed and available in
– Rope braid in solid colours, in two-colours combinations or in mélange colours
– Aquatech braid in solid colours
– Twiggy braids in mélange colours.

Notes:
This product can be used also in interior environments.

We advise to use a Winter Set protection cover.

The post Frame Bench appeared first on ddc.

Structure: cold injected stress resistant polyurethane foam treated to be water repellent.
Upholstery: fixed, woven with Rope cord.

Notes:
This product can be used also in interior environments.

We advise to use a Winter Set protection cover.

The post Shell appeared first on ddc.

Structure: majolica.

The side table structure is crafted and decorated by hand with exclusive colours by Nicolò Morales.

Notes:
The material, the particular handwork and the production technique used for the Anemone side table lead to colour, shape and design differences between tables, even from the same batch and typology. The irregularity and the uniqueness of each item are sought after and are the featuring characteristics of this series.

The Anemone side tables are suited for an outdoor use, but do not withstand temperatures below 0°C. It is therefore necessary to protect the tables in an enclosed space in case of particularly harsh weather conditions, during the night if frost is expected or in areas subject to high day/night temperature variations and always for seasonal protection.

This product can be used also in interior environments.

We advise to use the Winter Set protection cover.

The post Anemone appeared first on ddc.

Structure: aluminium, matt varnished in the colours in the collection or gloss varnished (reference colours: Mano Lucida wood sample collection).
Supporting rods: fiberglass, matt or gloss varnished in colour matching the structure.Ballast: cast iron, matt or gloss varnished in colour matching the structure.
Sunshade: in Madras or Tamil fabric.

Notes:
Bistrò can stand free, but we recommend, whether it is possible, to anchor it to the ground; in both cases it is necessary to use the supplied moulded cast iron ballast.

We advise to use a Winter Set protection cover.

The post Bistrò appeared first on ddc.

Structure: stainless steel AISI 316, matt or gloss-varnished in a colour matching the lamp shade (reference colours: Mano Lucida wood sample collection).
Lamp shade: Twitape yarn.
Light body: variable light, 2,5W/2700K Led module.

Notes:
The battery is designed for six hours of autonomy at maximun light output and can be charged using the supplied battery charger included or with any other device with male USB connector.

This product can be used also in interior environments.

The post Lucerna appeared first on ddc.